Et comme ça

[ 0.000000] Linux version 5.3.18-lp152.19-default (geeko@buildhost) (gcc version 7.5.0 (SUSE Linux)) #1 SMP Tue Jun 9 20:59:24 UTC 2020 (960cb00)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.18-lp152.19-default root=UUID…320781-c9ee-4a75-9827-c8c6079fd812 nolapic splash=silent resume=/dev/disk/by-id/ata-ST9500325AS_5VEFEDW9-part1 mitigations=auto quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b4b1efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b4b1f000-0x00000000b531ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b5320000-0x00000000b537bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b537c000-0x00000000b677bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b677c000-0x00000000bf77efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf77f000-0x00000000bf97efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf97f000-0x00000000bfb7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfb7f000-0x00000000bfbfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfbff000-0x00000000bfbfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfc00000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Packard Bell EasyNote TE69KB/EasyNote TE69KB, BIOS V2.09 11/19/2013
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1297.634 MHz processor
[ 0.019010] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.019015] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.019032] last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[ 0.019042] MTRR default type: uncachable
[ 0.019045] MTRR fixed ranges enabled:
[ 0.019048] 00000-9FFFF write-back
[ 0.019051] A0000-BFFFF uncachable
[ 0.019054] C0000-FFFFF write-through
[ 0.019056] MTRR variable ranges enabled:
[ 0.019060] 0 base 0000000000 mask FF80000000 write-back
[ 0.019063] 1 base 0080000000 mask FFC0000000 write-back
[ 0.019067] 2 base 00BFB67000 mask FFFFFFF000 uncachable
[ 0.019070] 3 base 00FFC00000 mask FFFFC00000 write-protect
[ 0.019071] 4 disabled
[ 0.019073] 5 disabled
[ 0.019074] 6 disabled
[ 0.019076] 7 disabled
[ 0.019078] TOM2: 000000021f000000 aka 8688M
[ 0.019841] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.019976] last_pfn = 0xbfc00 max_arch_pfn = 0x400000000
[ 0.032368] found SMP MP-table at [mem 0x000fe270-0x000fe27f]
[ 0.035694] check: Scanning 1 areas for low memory corruption
[ 0.035705] Using GB pages for direct mapping
[ 0.035710] BRK [0x21801000, 0x21801fff] PGTABLE
[ 0.035716] BRK [0x21802000, 0x21802fff] PGTABLE
[ 0.035719] BRK [0x21803000, 0x21803fff] PGTABLE
[ 0.035790] BRK [0x21804000, 0x21804fff] PGTABLE
[ 0.035795] BRK [0x21805000, 0x21805fff] PGTABLE
[ 0.036266] BRK [0x21806000, 0x21806fff] PGTABLE
[ 0.036334] BRK [0x21807000, 0x21807fff] PGTABLE
[ 0.036383] BRK [0x21808000, 0x21808fff] PGTABLE
[ 0.036452] BRK [0x21809000, 0x21809fff] PGTABLE
[ 0.036505] RAMDISK: [mem 0x35775000-0x36bb1fff]
[ 0.036525] ACPI: Early table checksum verification disabled
[ 0.036536] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[ 0.036545] ACPI: XSDT 0x00000000BFBFE120 0000A4 (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.036559] ACPI: FACP 0x00000000BFBFC000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.036574] ACPI: DSDT 0x00000000BFBED000 00A01D (v01 ACRSYS ACRPRDCT F0000000 1025 00040000)
[ 0.036584] ACPI: FACS 0x00000000BFB26000 000040
[ 0.036592] ACPI: UEFI 0x00000000BFBFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.036601] ACPI: HPET 0x00000000BFBFB000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.036610] ACPI: APIC 0x00000000BFBFA000 000090 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.036619] ACPI: MCFG 0x00000000BFBF9000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.036627] ACPI: ASF! 0x00000000BFBF8000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.036636] ACPI: BOOT 0x00000000BFBEC000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.036644] ACPI: WDRT 0x00000000BFBEB000 000047 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.036652] ACPI: WDAT 0x00000000BFBEA000 0001AC (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.036660] ACPI: FPDT 0x00000000BFBE9000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.036668] ACPI: MSDM 0x00000000BFBE7000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.036676] ACPI: SSDT 0x00000000BFBE6000 00096C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.036684] ACPI: SSDT 0x00000000BFBE1000 0046B7 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.036692] ACPI: SSDT 0x00000000BFBDF000 0013CA (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.036700] ACPI: SSDT 0x00000000BFBDE000 000D4E (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.036708] ACPI: SSDT 0x00000000BFBDC000 0010C2 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.037008] No NUMA configuration found
[ 0.037010] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[ 0.037032] NODE_DATA(0) allocated [mem 0x21efe8000-0x21effdfff]
[ 0.037140] Zone ranges:
[ 0.037142] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.037145] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.037148] Normal [mem 0x0000000100000000-0x000000021effffff]
[ 0.037151] Device empty
[ 0.037153] Movable zone start for each node
[ 0.037157] Early memory node ranges
[ 0.037159] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.037161] node 0: [mem 0x0000000000100000-0x00000000b4b1efff]
[ 0.037164] node 0: [mem 0x00000000b5320000-0x00000000b537bfff]
[ 0.037166] node 0: [mem 0x00000000b677c000-0x00000000bf77efff]
[ 0.037168] node 0: [mem 0x00000000bfbff000-0x00000000bfbfffff]
[ 0.037170] node 0: [mem 0x0000000100000000-0x000000021effffff]
[ 0.037447] Zeroed struct page in unavailable ranges: 9443 pages
[ 0.037450] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[ 0.037454] On node 0 totalpages: 1952541
[ 0.037457] DMA zone: 64 pages used for memmap
[ 0.037459] DMA zone: 21 pages reserved
[ 0.037461] DMA zone: 3998 pages, LIFO batch:0
[ 0.037692] DMA32 zone: 12078 pages used for memmap
[ 0.037694] DMA32 zone: 772991 pages, LIFO batch:63
[ 0.085895] Normal zone: 18368 pages used for memmap
[ 0.085901] Normal zone: 1175552 pages, LIFO batch:63
[ 0.087898] ACPI: PM-Timer IO Port: 0x408
[ 0.087908] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.087921] Intel MultiProcessor Specification v1.4
[ 0.087929] MPTABLE: OEM ID: Insyde
[ 0.087930] MPTABLE: Product ID: Larne
[ 0.087932] MPTABLE: APIC at: 0xFEE00000
[ 0.087938] Processor #0 (Bootup-CPU)
[ 0.087951] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.087962] Processors: 1
[ 0.087965] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.088022] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.088027] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.088029] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.088030] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.088035] PM: Registered nosave memory: [mem 0xb4b1f000-0xb531ffff]
[ 0.088040] PM: Registered nosave memory: [mem 0xb537c000-0xb677bfff]
[ 0.088045] PM: Registered nosave memory: [mem 0xbf77f000-0xbf97efff]
[ 0.088047] PM: Registered nosave memory: [mem 0xbf97f000-0xbfb7efff]
[ 0.088048] PM: Registered nosave memory: [mem 0xbfb7f000-0xbfbfefff]
[ 0.088053] PM: Registered nosave memory: [mem 0xbfc00000-0xdfffffff]
[ 0.088054] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.088056] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.088058] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.088059] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.088061] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.088062] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.088064] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
[ 0.088065] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[ 0.088067] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
[ 0.088069] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.088070] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.088072] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.088076] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.088078] Booting paravirtualized kernel on bare hardware
[ 0.088085] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.381462] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.382212] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u2097152
[ 0.382240] pcpu-alloc: s192512 r8192 d28672 u2097152 alloc=1*2097152
[ 0.382243] pcpu-alloc: [0] 0
[ 0.382308] Built 1 zonelists, mobility grouping on. Total pages: 1922010
[ 0.382310] Policy zone: Normal
[ 0.382315] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.18-lp152.19-default root=UUID…320781-c9ee-4a75-9827-c8c6079fd812 nolapic splash=silent resume=/dev/disk/by-id/ata-ST9500325AS_5VEFEDW9-part1 mitigations=auto quiet
[ 0.385116] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.386425] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.386481] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.440390] Memory: 3111672K/7810164K available (12291K kernel code, 1482K rwdata, 4224K rodata, 2152K init, 12988K bss, 263432K reserved, 0K cma-reserved)
[ 0.440409] random: get_random_u64 called from __kmem_cache_create+0x40/0x560 with crng_init=0
[ 0.440712] SLUB: HWalignd, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.440746] ftrace: allocating 38671 entries in 152 pages
[ 0.478583] rcu: Hierarchical RCU implementation.
[ 0.478586] rcu: RCU event tracing is enabled.
[ 0.478589] rcu: RCU restricting CPUs from NR_CPUSQ2 to nr_cpu_ids=1.
[ 0.478591] Tasks RCU enabled.
[ 0.478593] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.478595] rcu: Adjusting geometry for rcu_fanout_leaf, nr_cpu_ids=1
[ 0.491597] NR_IRQS: 33024, nr_irqs: 256, preallocated irqs: 16
[ 0.492059] spurious 8259A interrupt: IRQ7.
[ 0.492095] Console: colour dummy device 80x25
[ 0.492105] printk: console [tty0] enabled
[ 0.492141] ACPI: Core revision 20190703
[ 0.492510] ACPI: setting ELCR to 0200 (from 0cb8)
[ 0.492534] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.492553] APIC disabled via kernel command line
[ 0.492555] APIC: Keep in PIC mode(8259)
[ 0.492560] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x12b462e1daa, max_idle_ns: 440795203506 ns
[ 0.492569] Calibrating delay loop (skipped), value calculated using timer frequency.. 2595.26 BogoMIPS (lpjQ90536)
[ 0.492574] pid_max: default: 32768 minimum: 301
[ 0.492656] LSM: Security Framework initializing
[ 0.492732] AppArmor: AppArmor initialized
[ 0.492866] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.492910] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.493518] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.493521] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[ 0.493528] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.493533] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.493534] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.493539] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.504437] Freeing SMP alternatives memory: 36K
[ 0.512604] smpboot: SMP disabled
[ 0.512964] Performance Events:
[ 0.512968] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.512970] no hardware sampling interrupt available.
[ 0.512972] AMD PMU driver.
[ 0.512975] ... version: 0
[ 0.512976] ... bit width: 48
[ 0.512977] ... generic registers: 4
[ 0.512979] ... value mask: 0000ffffffffffff
[ 0.512980] ... max period: 00007fffffffffff
[ 0.512981] ... fixed-purpose events: 0
[ 0.512983] ... event mask: 000000000000000f
[ 0.513083] rcu: Hierarchical SRCU implementation.
[ 0.514129] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.514206] smp: Bringing up secondary CPUs ...
[ 0.514209] smp: Brought up 1 node, 1 CPU
[ 0.514211] smpboot: Max logical packages: 1
[ 0.514214] smpboot: Total of 1 processors activated (2595.26 BogoMIPS)
[ 0.516602] node 0 initialised, 1108765 pages in 4ms
[ 0.521009] devtmpfs: initialized
[ 0.521172] x86/mm: Memory block size: 128MB
[ 0.523469] PM: Registering ACPI NVS region [mem 0xbf97f000-0xbfb7efff] (2097152 bytes)
[ 0.523789] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.523798] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[ 0.523910] pinctrl core: initialized pinctrl subsystem
[ 0.524138] PM: RTC time: 09:31:16, date: 2020-12-08
[ 0.524461] NET: Registered protocol family 16
[ 0.524738] audit: initializing netlink subsys (disabled)
[ 0.525076] cpuidle: using governor ladder
[ 0.525078] cpuidle: using governor menu
[ 0.525222] Simple Boot Flag at 0x44 set to 0x1
[ 0.525247] ACPI: bus type PCI registered
[ 0.525250] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.525403] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.525421] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.525445] PCI: Using configuration type 1 for base access
[ 0.528587] audit: type 00 audit(1607419876.032:1): state=initialized audit_enabled=0 res=1
[ 0.530072] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.530076] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.536372] ACPI: Added _OSI(Module Device)
[ 0.536374] ACPI: Added _OSI(Processor Device)
[ 0.536376] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.536378] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.536381] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.536383] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.536386] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.584412] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.591390] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.601497] ACPI: EC: EC started
[ 0.601499] ACPI: EC: interrupt blocked
[ 0.615120] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC
[ 0.615125] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.615129] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions
[ 0.615130] ACPI: Interpreter enabled
[ 0.615193] ACPI: (supports S0 S3 S4 S5)
[ 0.615197] ACPI: Using PIC for interrupt routing
[ 0.615297] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.618008] ACPI: Enabled 3 GPEs in block 00 to 1F
[ 0.642920] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.642937] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.643770] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME LTR DPC]
[ 0.644578] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
[ 0.644624] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.645009] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000ce9ff])
[ 0.645591] PCI host bridge to bus 0000:00
[ 0.645597] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.645601] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.645605] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.645608] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.645612] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.645615] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.645619] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.645622] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.645626] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.645629] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.645632] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.645636] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.645639] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.645642] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.645646] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
[ 0.645650] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
[ 0.645653] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
[ 0.645657] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.645681] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
[ 0.645951] pci 0000:00:01.0: [1002:9836] type 00 class 0x030000
[ 0.645978] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.645992] pci 0000:00:01.0: reg 0x18: [mem 0xf0800000-0xf0ffffff 64bit pref]
[ 0.646001] pci 0000:00:01.0: reg 0x20: [io 0x3000-0x30ff]
[ 0.646011] pci 0000:00:01.0: reg 0x24: [mem 0xf0200000-0xf023ffff]
[ 0.646021] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.646028] pci 0000:00:01.0: enabling Extended Tags
[ 0.646088] pci 0000:00:01.0: supports D1 D2
[ 0.646092] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.646385] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[ 0.646411] pci 0000:00:01.1: reg 0x10: [mem 0xf0240000-0xf0243fff 64bit]
[ 0.646446] pci 0000:00:01.1: enabling Extended Tags
[ 0.646501] pci 0000:00:01.1: supports D1 D2
[ 0.646712] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
[ 0.646955] pci 0000:00:02.2: [1022:1439] type 01 class 0x060400
[ 0.647008] pci 0000:00:02.2: enabling Extended Tags
[ 0.647073] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[ 0.647366] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
[ 0.647419] pci 0000:00:02.3: enabling Extended Tags
[ 0.647484] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[ 0.647794] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.647826] pci 0000:00:10.0: reg 0x10: [mem 0xf0248000-0xf0249fff 64bit]
[ 0.647946] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.648235] pci 0000:00:11.0: [1022:7800] type 00 class 0x01018f
[ 0.648259] pci 0000:00:11.0: reg 0x10: [io 0x3118-0x311f]
[ 0.648270] pci 0000:00:11.0: reg 0x14: [io 0x3124-0x3127]
[ 0.648280] pci 0000:00:11.0: reg 0x18: [io 0x3110-0x3117]
[ 0.648291] pci 0000:00:11.0: reg 0x1c: [io 0x3120-0x3123]
[ 0.648301] pci 0000:00:11.0: reg 0x20: [io 0x3100-0x310f]
[ 0.648312] pci 0000:00:11.0: reg 0x24: [mem 0xf024e000-0xf024e3ff]
[ 0.648343] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.648375] pci 0000:00:11.0: PME# supported from D3hot
[ 0.649066] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.649087] pci 0000:00:12.0: reg 0x10: [mem 0xf024d000-0xf024dfff]
[ 0.649405] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.649429] pci 0000:00:12.2: reg 0x10: [mem 0xf024c000-0xf024c0ff]
[ 0.649516] pci 0000:00:12.2: supports D1 D2
[ 0.649520] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.649786] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.649807] pci 0000:00:13.0: reg 0x10: [mem 0xf024b000-0xf024bfff]
[ 0.650126] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.650150] pci 0000:00:13.2: reg 0x10: [mem 0xf024a000-0xf024a0ff]
[ 0.650236] pci 0000:00:13.2: supports D1 D2
[ 0.650239] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.650506] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.650832] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.650861] pci 0000:00:14.2: reg 0x10: [mem 0xf0244000-0xf0247fff 64bit]
[ 0.650943] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.651202] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.651525] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
[ 0.651752] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
[ 0.651970] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
[ 0.652188] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
[ 0.652412] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
[ 0.652646] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
[ 0.653013] pci 0000:01:00.0: [1969:10a1] type 00 class 0x020000
[ 0.653053] pci 0000:01:00.0: reg 0x10: [mem 0xf1000000-0xf103ffff 64bit]
[ 0.653067] pci 0000:01:00.0: reg 0x18: [io 0x2000-0x207f]
[ 0.653203] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.653416] pci 0000:01:00.1: [1969:3010] type 00 class 0x080501
[ 0.653455] pci 0000:01:00.1: reg 0x10: [mem 0xf1040000-0xf10400ff 64bit]
[ 0.653596] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.664643] pci 0000:00:02.2: PCI bridge to [bus 01-04]
[ 0.664655] pci 0000:00:02.2: bridge window [io 0x2000-0x2fff]
[ 0.664663] pci 0000:00:02.2: bridge window [mem 0xf1000000-0xf1ffffff]
[ 0.664670] pci 0000:00:02.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.664901] pci 0000:05:00.0: [168c:0036] type 00 class 0x028000
[ 0.664942] pci 0000:05:00.0: reg 0x10: [mem 0xf0100000-0xf017ffff 64bit]
[ 0.664997] pci 0000:05:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.665108] pci 0000:05:00.0: supports D1 D2
[ 0.665112] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.676636] pci 0000:00:02.3: PCI bridge to [bus 05]
[ 0.676652] pci 0000:00:02.3: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.679989] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.680238] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.680603] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 10 11 12 14 15)
[ 0.680848] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.681092] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 7 10 11 12 14 15)
[ 0.681298] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 7 10 11 12 14 15)
[ 0.681504] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.681711] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.682397] ACPI: EC: interrupt unblocked
[ 0.682412] ACPI: EC: event unblocked
[ 0.682423] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.682427] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions and events
[ 0.682753] iommu: Default domain type: Passthrough
[ 0.682840] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 0.682844] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.682856] pci 0000:00:01.0: vgaarb: bridge control possible
[ 0.682858] vgaarb: loaded
[ 0.683095] SCSI subsystem initialized
[ 0.683179] libata version 3.00 loaded.
[ 0.683269] pps_core: LinuxPPS API ver. 1 registered
[ 0.683271] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.683278] PTP clock support registered
[ 0.683296] EDAC MC: Ver: 3.0.0
[ 0.683600] PCI: Using ACPI for IRQ routing
[ 0.685551] PCI: pci_cache_line_size set to 64 bytes
[ 0.685635] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.685638] e820: reserve RAM buffer [mem 0xb4b1f000-0xb7ffffff]
[ 0.685641] e820: reserve RAM buffer [mem 0xb537c000-0xb7ffffff]
[ 0.685643] e820: reserve RAM buffer [mem 0xbf77f000-0xbfffffff]
[ 0.685646] e820: reserve RAM buffer [mem 0xbfc00000-0xbfffffff]
[ 0.685649] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.685908] NetLabel: Initializing
[ 0.685910] NetLabel: domain hash size = 128
[ 0.685912] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.685956] NetLabel: unlabeled traffic allowed by default
[ 0.686174] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.686181] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.688255] clocksource: Switched to clocksource tsc-early
[ 0.721665] VFS: Disk quotas dquot_6.6.0
[ 0.721706] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.721994] AppArmor: AppArmor Filesystem Enabled
[ 0.722041] pnp: PnP ACPI init
[ 0.722484] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.722986] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.723136] system 00:02: [io 0x0400-0x04cf] has been reserved
[ 0.723140] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.723144] system 00:02: [io 0x04d6] has been reserved
[ 0.723148] system 00:02: [io 0x0680-0x06ff] has been reserved
[ 0.723152] system 00:02: [io 0x077a] has been reserved
[ 0.723156] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.723160] system 00:02: [io 0x0c14] has been reserved
[ 0.723163] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 0.723167] system 00:02: [io 0x0c6c] has been reserved
[ 0.723171] system 00:02: [io 0x0c6f] has been reserved
[ 0.723175] system 00:02: [io 0x0cd0-0x0cdb] could not be reserved
[ 0.723179] system 00:02: [io 0x0840-0x0847] has been reserved
[ 0.723190] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.723441] system 00:03: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.723446] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.723457] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.723710] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.723852] pnp 00:05: Plug and Play ACPI device, IDs SYN1b75 SYN1b00 SYN0002 PNP0f13 (active)
[ 0.725829] pnp: PnP ACPI: found 6 devices
[ 0.729931] thermal_sys: Registered thermal governor 'fair_share'
[ 0.729933] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.729935] thermal_sys: Registered thermal governor 'step_wise'
[ 0.729936] thermal_sys: Registered thermal governor 'user_space'
[ 0.734451] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.734555] pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: address conflict with Reserved [mem 0xffc00000-0xffffffff]
[ 0.734561] pci 0000:05:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.734593] pci 0000:00:01.0: BAR 6: assigned [mem 0xf0260000-0xf027ffff pref]
[ 0.734601] pci 0000:00:02.2: PCI bridge to [bus 01-04]
[ 0.734607] pci 0000:00:02.2: bridge window [io 0x2000-0x2fff]
[ 0.734615] pci 0000:00:02.2: bridge window [mem 0xf1000000-0xf1ffffff]
[ 0.734621] pci 0000:00:02.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.734631] pci 0000:05:00.0: BAR 6: assigned [mem 0xf0180000-0xf018ffff pref]
[ 0.734635] pci 0000:00:02.3: PCI bridge to [bus 05]
[ 0.734642] pci 0000:00:02.3: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.734656] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.734660] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.734663] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.734667] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.734670] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.734674] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.734677] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.734681] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.734684] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.734688] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.734691] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.734694] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.734698] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.734701] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.734705] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff window]
[ 0.734708] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff window]
[ 0.734712] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff window]
[ 0.734715] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.734719] pci_bus 0000:01: resource 1 [mem 0xf1000000-0xf1ffffff]
[ 0.734722] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.734726] pci_bus 0000:05: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.735034] NET: Registered protocol family 2
[ 0.735369] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.735406] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.735679] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.736001] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.736091] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.736147] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.736457] NET: Registered protocol family 1
[ 0.736479] NET: Registered protocol family 44
[ 0.736511] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.736525] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
[ 0.737189] PCI Interrupt Link [LNKC] enabled at IRQ 7
[ 0.737192] PCI: setting IRQ 7 as level-triggered
[ 0.757335] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x690 took 18053 usecs
[ 0.757790] PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 0.757793] PCI: setting IRQ 5 as level-triggered
[ 0.758005] pci 0000:00:12.2: PME# does not work under D3, disabling it
[ 0.777329] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x690 took 18843 usecs
[ 0.777728] pci 0000:00:13.2: PME# does not work under D3, disabling it
[ 0.777779] pci 0000:01:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.777795] PCI: CLS 64 bytes, default 64
[ 0.777918] Trying to unpack rootfs image as initramfs...
[ 1.512838] random: fast init done
[ 5.864863] Freeing initrd memory: 20724K
[ 5.864977] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 5.864981] software IO TLB: mapped [mem 0xbb77f000-0xbf77f000] (64MB)
[ 5.865116] amd_uncore: AMD NB counters detected
[ 5.865121] amd_uncore: AMD LLC counters detected
[ 5.865151] LVT offset 0 assigned for vector 0x400
[ 5.865171] perf: AMD IBS detected (0x000000ff)
[ 5.865290] check: Scanning for low memory corruption every 60 seconds
[ 5.866245] Initialise system trusted keyrings
[ 5.866268] Key type blacklist registered
[ 5.866385] workingset: timestamp_bits7 max_order! bucket_order=0
[ 5.870554] zbud: loaded
[ 5.871775] Platform Keyring initialized
[ 5.887041] Key type asymmetric registered
[ 5.887044] Asymmetric key parser 'x509' registered
[ 5.887070] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 5.887152] io scheduler mq-deadline registered
[ 5.887155] io scheduler kyber registered
[ 5.887250] io scheduler bfq registered
[ 5.888483] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.888546] vesafb: mode is 1366x768x32, linelengthV32, pages=0
[ 5.888547] vesafb: scrolling: redraw
[ 5.888551] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 5.888602] vesafb: framebuffer at 0xe0000000, mapped to 0x(____ptrval____), using 4224k, total 4224k
[ 5.888843] Console: switching to colour frame buffer device 170x48
[ 5.976069] fb0: VESA VGA frame buffer device
[ 5.976722] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 5.980030] Non-volatile memory driver v1.3
[ 5.980095] Linux agpgart interface v0.103
[ 5.981024] ahci 0000:00:11.0: version 3.0
[ 5.981465] PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 5.981468] PCI: setting IRQ 11 as level-triggered
[ 5.981564] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 5.981571] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
[ 5.984502] scsi host0: ahci
[ 5.984825] scsi host1: ahci
[ 5.984935] ata1: SATA max UDMA/133 abar m1024@0xf024e000 port 0xf024e100 irq 11
[ 5.984939] ata2: SATA max UDMA/133 abar m1024@0xf024e000 port 0xf024e180 irq 11
[ 5.985108] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 5.994139] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.994151] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.994424] mousedev: PS/2 mouse device common for all mice
[ 5.994611] rtc_cmos 00:01: RTC can wake from S4
[ 5.994886] rtc_cmos 00:01: registered as rtc0
[ 5.994931] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[ 5.994970] ledtrig-cpu: registered to indicate activity on CPUs
[ 5.995002] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.995111] x86/pm: family 0x16 cpu detected, MSR saving is needed during suspending.
[ 5.995135] drop_monitor: Initializing network drop monitor service
[ 5.995608] NET: Registered protocol family 10
[ 6.004428] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 6.015438] Segment Routing with IPv6
[ 6.015857] RAS: Correctable Errors collector initialized.
[ 6.015864] microcode: microcode updated early to new patch_level=0x0700010f
[ 6.015926] microcode: CPU0: patch_level=0x0700010f
[ 6.015934] microcode: Microcode Update Driver: v2.2.
[ 6.015943] IPI shorthand broadcast: enabled
[ 6.015968] sched_clock: Marking stable (6011950084, 624090)->(7084168924, -1071594750)
[ 6.016288] registered taskstats version 1
[ 6.016299] Loading compiled-in X.509 certificates
[ 6.016388] Loaded X.509 cert 'openSUSE Secure Boot Signkey: 0332fa9cbf0d88bf21924b0de82a09a54d5defc8'
[ 6.016435] zswap: loaded using pool lzo/zbud
[ 6.016488] page_owner is disabled
[ 6.034559] Key type big_key registered
[ 6.043584] Key type encrypted registered
[ 6.043591] AppArmor: AppArmor sha1 policy hashing enabled
[ 6.043605] ima: No TPM chip found, activating TPM-bypass!
[ 6.043618] ima: Allocated hash algorithm: sha256
[ 6.043647] ima: No architecture policies found
[ 6.043666] evm: Initialising EVM extended attributes:
[ 6.043668] evm: security.selinux
[ 6.043669] evm: security.apparmor
[ 6.043670] evm: security.ima
[ 6.043672] evm: security.capability
[ 6.043673] evm: HMAC attrs: 0x1
[ 6.044842] PM: Magic number: 0:70:525
[ 6.045040] rtc_cmos 00:01: setting system clock to 2020-12-08T09:31:23 UTC (1607419883)
[ 6.464814] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.464847] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.467147] ata2.00: ATAPI: HL-DT-ST DVDRAM GUA0N, 1.00, max UDMA/133
[ 6.468770] ata2.00: configured for UDMA/133
[ 6.509970] ata1.00: ATA-8: ST9500325AS, 0001SDM1, max UDMA/133
[ 6.509976] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
[ 6.512182] ata1.00: configured for UDMA/133
[ 6.512462] scsi 0:0:0:0: Direct-Access ATA ST9500325AS SDM1 PQ: 0 ANSI: 5
[ 6.513047] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 6.513078] sd 0:0:0:0: [sda] Write Protect is off
[ 6.513083] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.513133] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.516345] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUA0N 1.00 PQ: 0 ANSI: 5
[ 6.529360] sda: sda1 sda2 sda3
[ 6.530315] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.892615] tsc: Refined TSC clocksource calibration: 1297.566 MHz
[ 6.892626] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x12b422bd00e, max_idle_ns: 440795235945 ns
[ 6.892649] clocksource: Switched to clocksource tsc
[ 6.948433] psmouse serio1: synaptics: queried max coordinates: x [..5722], y [..4816]
[ 6.996571] psmouse serio1: synaptics: queried min coordinates: x [1226..], y [1130..]
[ 7.088256] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00273/0x240000/0xa2400/0x0, board id: 2729, fw id: 1454696
[ 7.145611] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 7.154245] Freeing unused decrypted memory: 2040K
[ 7.155392] Freeing unused kernel image memory: 2152K
[ 7.155402] Write protecting the kernel read-only data: 20480k
[ 7.156837] Freeing unused kernel image memory: 2036K
[ 7.157855] Freeing unused kernel image memory: 1920K
[ 7.157866] Run /init as init process
[ 7.173774] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid)
[ 7.192907] systemd[1]: Detected architecture x86-64.
[ 7.192918] systemd[1]: Running in initial RAM disk.
[ 7.192998] systemd[1]: No hostname configured.
[ 7.193013] systemd[1]: Set hostname to <localhost>.
[ 7.193107] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.193125] systemd[1]: Initializing machine ID from random generator.
[ 7.332193] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.332291] systemd[1]: Listening on udev Control Socket.
[ 7.332399] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.332497] systemd[1]: Listening on Journal Socket.
[ 7.332631] systemd[1]: Listening on udev Kernel Socket.
[ 7.332683] systemd[1]: Reached target Timers.
[ 7.536621] alua: device handler registered
[ 7.538707] emc: device handler registered
[ 7.544844] rdac: device handler registered
[ 7.624944] device-mapper: uevent: version 1.0.3
[ 7.625120] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[ 7.655007] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.655115] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 9.128281] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 9.129640] acpi device:00: registered as cooling_device1
[ 9.129778] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 9.204510] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 9.495747] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 9.495755] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 9.496238] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 9.612643] sdhci: Secure Digital Host Controller Interface driver
[ 9.612647] sdhci: Copyright(c) Pierre Ossman
[ 9.683891] ACPI: bus type USB registered
[ 9.683950] usbcore: registered new interface driver usbfs
[ 9.683980] usbcore: registered new interface driver hub
[ 9.684039] usbcore: registered new device driver usb
[ 9.697388] sdhci-pci 0000:01:00.1: SDHCI controller found [1969:3010] (rev 13)
[ 9.697845] PCI Interrupt Link [LNKF] enabled at IRQ 4
[ 9.697848] PCI: setting IRQ 4 as level-triggered
[ 9.757020] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.759236] ehci-pci: EHCI PCI platform driver
[ 9.759620] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 9.759635] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 9.759648] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 9.759659] ehci-pci 0000:00:12.2: debug port 1
[ 9.759713] ehci-pci 0000:00:12.2: irq 5, io mem 0xf024c000
[ 9.759932] mmc0: SDHCI controller on PCI [0000:01:00.1] using ADMA
[ 9.787365] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 9.787533] usb usb1: New USB device found, idVendor6b, idProduct02, bcdDevice= 5.03
[ 9.787538] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.787541] usb usb1: Product: EHCI Host Controller
[ 9.787545] usb usb1: Manufacturer: Linux 5.3.18-lp152.19-default ehci_hcd
[ 9.787548] usb usb1: SerialNumber: 0000:00:12.2
[ 9.787864] hub 1-0:1.0: USB hub found
[ 9.787884] hub 1-0:1.0: 4 ports detected
[ 9.789101] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 9.789115] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 9.789124] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 9.789136] ehci-pci 0000:00:13.2: debug port 1
[ 9.789186] ehci-pci 0000:00:13.2: irq 5, io mem 0xf024a000
[ 9.807022] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 9.807180] usb usb2: New USB device found, idVendor6b, idProduct02, bcdDevice= 5.03
[ 9.807185] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.807188] usb usb2: Product: EHCI Host Controller
[ 9.807191] usb usb2: Manufacturer: Linux 5.3.18-lp152.19-default ehci_hcd
[ 9.807195] usb usb2: SerialNumber: 0000:00:13.2
[ 9.807554] hub 2-0:1.0: USB hub found
[ 9.807578] hub 2-0:1.0: 4 ports detected
[ 9.829789] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 9.832025] ohci-pci: OHCI PCI platform driver
[ 9.832388] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 9.832404] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 9.832458] ohci-pci 0000:00:12.0: irq 7, io mem 0xf024d000
[ 9.901090] usb usb3: New USB device found, idVendor6b, idProduct01, bcdDevice= 5.03
[ 9.901097] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.901101] usb usb3: Product: OHCI PCI host controller
[ 9.901104] usb usb3: Manufacturer: Linux 5.3.18-lp152.19-default ohci_hcd
[ 9.901107] usb usb3: SerialNumber: 0000:00:12.0
[ 9.901469] hub 3-0:1.0: USB hub found
[ 9.901492] hub 3-0:1.0: 4 ports detected
[ 9.902257] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 9.902271] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 9.902318] ohci-pci 0000:00:13.0: irq 7, io mem 0xf024b000
[ 9.980766] usb usb4: New USB device found, idVendor6b, idProduct01, bcdDevice= 5.03
[ 9.980774] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.980777] usb usb4: Product: OHCI PCI host controller
[ 9.980781] usb usb4: Manufacturer: Linux 5.3.18-lp152.19-default ohci_hcd
[ 9.980784] usb usb4: SerialNumber: 0000:00:13.0
[ 9.981155] hub 4-0:1.0: USB hub found
[ 9.981177] hub 4-0:1.0: 4 ports detected
[ 10.045043] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 10.045068] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
[ 10.045268] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
[ 10.045548] usb usb5: New USB device found, idVendor6b, idProduct02, bcdDevice= 5.03
[ 10.045553] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.045556] usb usb5: Product: xHCI Host Controller
[ 10.045560] usb usb5: Manufacturer: Linux 5.3.18-lp152.19-default xhci-hcd
[ 10.045563] usb usb5: SerialNumber: 0000:00:10.0
[ 10.045875] hub 5-0:1.0: USB hub found
[ 10.045899] hub 5-0:1.0: 2 ports detected
[ 10.046238] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 10.046247] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[ 10.046255] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
[ 10.180037] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 10.180121] usb usb6: New USB device found, idVendor6b, idProduct03, bcdDevice= 5.03
[ 10.180126] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.180129] usb usb6: Product: xHCI Host Controller
[ 10.180133] usb usb6: Manufacturer: Linux 5.3.18-lp152.19-default xhci-hcd
[ 10.180136] usb usb6: SerialNumber: 0000:00:10.0
[ 10.180497] hub 6-0:1.0: USB hub found
[ 10.180519] hub 6-0:1.0: 2 ports detected
[ 10.208629] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 10.336585] raid6: sse2x4 gen() 3400 MB/s
[ 10.404581] raid6: sse2x4 xor() 1726 MB/s
[ 10.472580] raid6: sse2x2 gen() 3386 MB/s
[ 10.540582] raid6: sse2x2 xor() 2118 MB/s
[ 10.608586] raid6: sse2x1 gen() 2700 MB/s
[ 10.676584] raid6: sse2x1 xor() 1582 MB/s
[ 10.676586] raid6: using algorithm sse2x4 gen() 3400 MB/s
[ 10.676588] raid6: .... xor() 1726 MB/s, rmw enabled
[ 10.676590] raid6: using ssse3x2 recovery algorithm
[ 10.798993] usb 3-1: new low-speed USB device number 2 using ohci-pci
[ 10.846828] random: crng init done
[ 10.846833] random: 7 urandom warning(s) missed due to ratelimiting
[ 10.895952] usb 2-1: New USB device found, idVendor4e, idProductÄ00, bcdDevice= 1.01
[ 10.895958] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.895962] usb 2-1: Product: HD WebCam
[ 10.895965] usb 2-1: Manufacturer: SuYin
[ 11.026286] usb 3-1: New USB device found, idVendor8f, idProducta4, bcdDevice= 3.11
[ 11.026293] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 11.026297] usb 3-1: Product: 2.4G RX
[ 11.026300] usb 3-1: Manufacturer: DKTEK
[ 11.071903] usbcore: registered new interface driver usbhid
[ 11.071907] usbhid: USB HID core driver
[ 11.076324] input: DKTEK 2.4G RX as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:0E8F:00A4.0001/input/input4
[ 11.133753] hid-generic 0003:0E8F:00A4.0001: input,hidraw0: USB HID v1.10 Keyboard [DKTEK 2.4G RX] on usb-0000:00:12.0-1/input0
[ 11.134566] input: DKTEK 2.4G RX Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/0003:0E8F:00A4.0002/input/input5
[ 11.138112] input: DKTEK 2.4G RX System Control as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/0003:0E8F:00A4.0002/input/input6
[ 11.140961] [drm] radeon kernel modesetting enabled.
[ 11.141053] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
[ 11.141057] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0800000 -> 0xf0ffffff
[ 11.141061] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 5: 0xf0200000 -> 0xf023ffff
[ 11.141065] checking generic (e0000000 420000) vs hw (e0000000 10000000)
[ 11.141067] fb0: switching to radeondrmfb from VESA VGA
[ 11.141959] Console: switching to colour dummy device 80x25
[ 11.142355] radeon 0000:00:01.0: vgaarb: deactivate vga console
[ 11.142954] PCI Interrupt Link [LNKE] enabled at IRQ 3
[ 11.142957] PCI: setting IRQ 3 as level-triggered
[ 11.143506] [drm] initializing kernel modesetting (KABINI 0x1002:0x9836 0x1025:0x076F 0x00).
[ 11.143545] [drm] doorbell mmio base: 0xF0800000
[ 11.143547] [drm] doorbell mmio size: 8388608
[ 11.143576] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window]
[ 11.143584] caller pci_map_rom+0x6a/0x1c0 mapping multiple BARs
[ 11.148811] ATOM BIOS: AMD
[ 11.148886] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 11.148891] radeon 0000:00:01.0: GTT: 2048M 0x0000000020000000 - 0x000000009FFFFFFF
[ 11.148900] [drm] Detected VRAM RAMQ2M, BAR%6M
[ 11.148901] [drm] RAM width 128bits DDR
[ 11.153972] [TTM] Zone kernel: Available graphics memory: 3787820 KiB
[ 11.153975] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 11.153976] [TTM] Initializing pool allocator
[ 11.153991] [TTM] Initializing DMA pool allocator
[ 11.154030] [drm] radeon: 512M of VRAM memory ready
[ 11.154033] [drm] radeon: 2048M of GTT memory ready.
[ 11.154057] [drm] Loading kabini Microcode
[ 11.154317] [drm] Internal thermal controller without fan control
[ 11.155465] [drm] radeon: dpm initialized
[ 11.155647] [drm] Found UVD firmware Version: 1.64 Family ID: 9
[ 11.157729] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[ 11.158778] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 11.205175] input: DKTEK 2.4G RX Consumer Control as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/0003:0E8F:00A4.0002/input/input7
[ 11.205788] input: DKTEK 2.4G RX as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/0003:0E8F:00A4.0002/input/input8
[ 11.206346] hid-generic 0003:0E8F:00A4.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [DKTEK 2.4G RX] on usb-0000:00:12.0-1/input1
[ 11.236730] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
[ 11.236948] radeon 0000:00:01.0: WB enabled
[ 11.236981] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x00000000186a3b0d
[ 11.236987] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0x00000000a94e5f81
[ 11.236991] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0x0000000076a98305
[ 11.236996] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x00000000ef016da2
[ 11.237000] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0x000000003ed37cca
[ 11.237882] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0x000000003c584eaa
[ 11.238222] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0x00000000b36ef833
[ 11.238226] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0x00000000525f9a4a
[ 11.238230] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.238231] [drm] Driver supports precise vblank timestamp query.
[ 11.238272] [drm] radeon: irq initialized.
[ 11.253581] [drm] ring test on 0 succeeded in 2 usecs
[ 11.253677] [drm] ring test on 1 succeeded in 3 usecs
[ 11.253705] [drm] ring test on 2 succeeded in 3 usecs
[ 11.253954] [drm] ring test on 3 succeeded in 4 usecs
[ 11.253963] [drm] ring test on 4 succeeded in 4 usecs
[ 11.345263] PM: Image not found (code -22)
[ 11.352644] [drm] ring test on 5 succeeded in 1 usecs
[ 11.378549] [drm] UVD initialized successfully.
[ 11.556013] [drm] ring test on 6 succeeded in 16 usecs
[ 11.556029] [drm] ring test on 7 succeeded in 4 usecs
[ 11.556030] [drm] VCE initialized successfully.
[ 11.556848] usb 4-2: new full-speed USB device number 2 using ohci-pci
[ 11.557574] [drm] ib test on ring 0 succeeded in 0 usecs
[ 11.557737] [drm] ib test on ring 1 succeeded in 0 usecs
[ 11.557896] [drm] ib test on ring 2 succeeded in 0 usecs
[ 11.558058] [drm] ib test on ring 3 succeeded in 0 usecs
[ 11.558217] [drm] ib test on ring 4 succeeded in 0 usecs
[ 11.590488] xor: automatically using best checksumming function avx
[ 11.767959] Btrfs loaded, crc32c=crc32c-intel, assert=on
[ 11.770154] BTRFS: device fsid 85320781-c9ee-4a75-9827-c8c6079fd812 devid 1 transid 94 /dev/sda3
[ 11.817298] usb 4-2: New USB device found, idVendorca, idProduct00b, bcdDevice= 0.01
[ 11.817304] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 12.028001] BTRFS info (device sda3): disk space caching is enabled
[ 12.028006] BTRFS info (device sda3): has skinny extents
[ 12.108817] [drm] ib test on ring 5 succeeded
[ 12.130130] [drm] ib test on ring 6 succeeded
[ 12.130827] [drm] ib test on ring 7 succeeded
[ 12.135859] [drm] radeon atom DIG backlight initialized
[ 12.135864] [drm] Radeon Display Connectors
[ 12.135866] [drm] Connector 0:
[ 12.135867] [drm] eDP-1
[ 12.135868] [drm] HPD1
[ 12.135872] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 12.135873] [drm] Encoders:
[ 12.135874] [drm] LCD1: INTERNAL_UNIPHY
[ 12.135876] [drm] Connector 1:
[ 12.135877] [drm] HDMI-A-1
[ 12.135878] [drm] HPD2
[ 12.135881] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 12.135882] [drm] Encoders:
[ 12.135883] [drm] DFP1: INTERNAL_UNIPHY
[ 12.135884] [drm] Connector 2:
[ 12.135885] [drm] VGA-1
[ 12.135888] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[ 12.135889] [drm] Encoders:
[ 12.135890] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 12.874666] [drm] fb mappable at 0xE0731000
[ 12.874670] [drm] vram apper at 0xE0000000
[ 12.874672] [drm] size 4325376
[ 12.874673] [drm] fb depth is 24
[ 12.874674] [drm] pitch is 5632
[ 12.874867] fbcon: radeondrmfb (fb0) is primary device
[ 14.464820] Console: switching to colour frame buffer device 170x48
[ 14.472717] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 14.553860] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[ 14.601212] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 14.601215] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 15.177184] [drm] amdgpu kernel modesetting enabled.
[ 15.177729] CRAT table not found
[ 15.177733] Virtual CRAT table created for CPU
[ 15.177736] Parsing CRAT table with 1 nodes
[ 15.177739] Creating topology SYSFS entries
[ 15.177767] Topology: Add CPU node
[ 15.177768] Finished initializing topology
[ 15.476994] systemd-journald[198]: Received SIGTERM from PID 1 (systemd).
[ 15.648664] printk: systemd: 20 output lines suppressed due to ratelimiting
[ 16.796519] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[ 18.429451] BTRFS info (device sda3): disk space caching is enabled
[ 21.404688] ata1.00: exception Emask 0x10 SAct 0x780 SErr 0x400001 action 0x6 frozen
[ 21.404693] ata1.00: irq_stat 0x08000000, interface fatal error
[ 21.404697] ata1: SError: { RecovData Handshk }
[ 21.404703] ata1.00: failed command: WRITE FPDMA QUEUED
[ 21.404714] ata1.00: cmd 61/00:38:b0:8d:85/0a:00:02:00:00/40 tag 7 ncq dma 1310720 ou
res 40/00:50:b0:ab:85/00:00:02:00:00/40 Emask 0x10 (ATA bus error)
[ 21.404717] ata1.00: status: { DRDY }
[ 21.404720] ata1.00: failed command: WRITE FPDMA QUEUED
[ 21.404729] ata1.00: cmd 61/00:40:b0:97:85/0a:00:02:00:00/40 tag 8 ncq dma 1310720 ou
res 40/00:50:b0:ab:85/00:00:02:00:00/40 Emask 0x10 (ATA bus error)
[ 21.404732] ata1.00: status: { DRDY }
[ 21.404735] ata1.00: failed command: WRITE FPDMA QUEUED
[ 21.404743] ata1.00: cmd 61/00:48:b0:a1:85/0a:00:02:00:00/40 tag 9 ncq dma 1310720 ou
res 40/00:50:b0:ab:85/00:00:02:00:00/40 Emask 0x10 (ATA bus error)
[ 21.404746] ata1.00: status: { DRDY }
[ 21.404749] ata1.00: failed command: WRITE FPDMA QUEUED
[ 21.404757] ata1.00: cmd 61/00:50:b0:ab:85/0a:00:02:00:00/40 tag 10 ncq dma 1310720 ou
res 40/00:50:b0:ab:85/00:00:02:00:00/40 Emask 0x10 (ATA bus error)
[ 21.404760] ata1.00: status: { DRDY }
[ 21.404768] ata1: hard resetting link
[ 21.880727] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 21.932850] ata1.00: configured for UDMA/133
[ 21.932888] ata1: EH complete
[ 21.964744] ata1.00: exception Emask 0x10 SAct 0xfc2000 SErr 0x400000 action 0x6 frozen
[ 21.964749] ata1.00: irq_stat 0x08000000, interface fatal error
[ 21.964753] ata1: SError: { Handshk }
[ 21.964759] ata1.00: failed command: READ FPDMA QUEUED
[ 21.964769] ata1.00: cmd 60/a8:68:70:5c:5a/04:00:02:00:00/40 tag 13 ncq dma 610304 in
res 40/00:68:70:5c:5a/00:00:02:00:00/40 Emask 0x10 (ATA bus error)
[ 21.964772] ata1.00: status: { DRDY }
[ 21.964776] ata1.00: failed command: WRITE FPDMA QUEUED
[ 21.964785] ata1.00: cmd 61/00:90:b0:b5:85/0a:00:02:00:00/40 tag 18 ncq dma 1310720 ou
res 40/00:68:70:5c:5a/00:00:02:00:00/40 Emask 0x10 (ATA bus error)
[ 21.964787] ata1.00: status: { DRDY }
[ 21.964790] ata1.00: failed command: WRITE FPDMA QUEUED
[ 21.964799] ata1.00: cmd 61/00:98:b0:bf:85/0a:00:02:00:00/40 tag 19 ncq dma 1310720 ou
res 40/00:68:70:5c:5a/00:00:02:00:00/40 Emask 0x10 (ATA bus error)
[ 21.964801] ata1.00: status: { DRDY }
[ 21.964804] ata1.00: failed command: WRITE FPDMA QUEUED
[ 21.964813] ata1.00: cmd 61/00:a0:b0:ab:85/0a:00:02:00:00/40 tag 20 ncq dma 1310720 ou
res 40/00:68:70:5c:5a/00:00:02:00:00/40 Emask 0x10 (ATA bus error)
[ 21.964815] ata1.00: status: { DRDY }
[ 21.964818] ata1.00: failed command: WRITE FPDMA QUEUED
[ 21.964826] ata1.00: cmd 61/00:a8:b0:a1:85/0a:00:02:00:00/40 tag 21 ncq dma 1310720 ou
res 40/00:68:70:5c:5a/00:00:02:00:00/40 Emask 0x10 (ATA bus error)
[ 21.964828] ata1.00: status: { DRDY }
[ 21.964831] ata1.00: failed command: WRITE FPDMA QUEUED
[ 21.964840] ata1.00: cmd 61/00:b0:b0:97:85/0a:00:02:00:00/40 tag 22 ncq dma 1310720 ou
res 40/00:68:70:5c