Nouveau Firmware 300D!!!

Enfin presque. Un custom menu a été créé par les russes. Un hack qui se
rajoute au menu et dans la langue d'origine en plus. Il y rajoute tous les
menus (pour l'instants pas toutes les fonctions)du 10D. Certaines fonctions
ne sont pas encore dispos mais ca va venir.

J'ai fait l'installe sans problème, un menu se rajoute dans le menu du 300D
en custom function comme le 10D.

Comme je n'ai pas le temps de recopier tous les menus en voici la copie
faite depuis le forum dpreview, vou y trouverez aussi le firmware.

<http://forums.dpreview.com/forums/read.asp?forum=1031&message=7500111>



Below is a summary of the behavior of the new custom functions, posted by n=
ubui in
the dpreview 300D forum.

Also reported, the red-eye reduction indicator blinks once this firmware is=
installed.
Apparently the indicator continues to blink even if you revert to the orgin=
al firmware
unless you first reset all custom functions to their default values.

cf1 SET button func. when shooting - works
0: default / no function (300D default)
1: change quality
2: change parameters
3: menu display
4: image replay

cf2 shutter release w/o cf-card - works
0: possible w/o cf-card (300D default)
1: not possible

cf3 flash sync speed in Av mode - works
0: auto (300D default)
1: 1/200 sec fixed

cf4 shutter button / ae lock button - not sure if it works
0: af/ae lock
1: ae lock/af
2: af/af lock, no ae lock
3: ae/af, no ae lock (300D default? not sure)

cf5 af assist beam/flash firing
0: emits/fires
1: does not emit/fires
2: only ext. flash emits/fires
3: emits/does not fire

cf5 doesn't seem to do anything (maybe only with external flash?)

cf6 exposure level increments
0: 1/2 stop
1: 1/3 stop (300D default)

cf6 seems to be about exposure compensation. seems to work, but the LCD on=
the
back doesn't seem to have the right amount of "ticks" to display this corre=
ctly.

cf7 af point registration
(lets you choose different af points, but not sure what that actually does=
)

cf8 raw + jpg rec
0: raw+small coarse
1: raw+small fine
2: raw+medium coarse
3: raw+medium fine (300D default?)
4: raw+large coarse
5: raw+large fine

didn't test yet - question: will changing the jpg size inside the raw infl=
uence C1?

cf9 bracket. sequence/auto cancel - didn't test yet
0: 0,-,+/enable (300D default)
1: 0,-,+/disable
2: -,0,+/enable
3: -,0,+/disable

cf10 superimposed display
0: on
1: off

cf10 doesn't seem to do anything (or I didn't find it)

cf11 menu button display position
0: previous(top if powered off)
1: previous
2: top

cf11 doesn't seem to do anything

cf12 mirror lockup
0: disable (300D default)
1: enable

cf12 doesn't seem to do anything (at least I don't know how to actually tr=
igger the
mirror to go up)

cf13 assist button function
0: normal
1: select home position
2: select HP (while pressing)
3: av+/- (af point by qcd)
4: fe lock

cf13 doesn't seem to have any function as there's no assist button

cf14 auto reduction of fill flash - not tested yet
0: enable (300D default)
1: disable

cf15 shutter curtain sync
0: 1st curtain sync
1: 2nd curtain sync

cf15 doesn't seem to do anything, at least with built-in flash. tried a 2s=
ec exposure
in M mode, but flash fired at the beginning. af lock didn't help either.

cf16 safety shift in av or tv
0: disable
1: enable

dunno what safety shift is, maybe exposure related?

cf17 lens af stop button function
0: af stop
1: af start
2: ae lock while metering
3: af point: m->auto/auto-ctr.
4: one shot -> <- ai servo
5: IS start



MArc lacaze