[orl_debian@ammd.net: Re: Re: [Xfree - Xorg] Driver xie et pex5 not found]

Le
Frédéric Bothamy
Bonjour,

Je crois que le mieux est de faire comme Davy l'a indiqué : rechercher
s'il n'y aurait pas un fichier gdm.conf.dpgk-new et fusionner les
valeurs de celui-ci avec ton fichier. Il est possible que le problème
vienne de "Greeter=/usr/bin/gdmgreeter" (c'est peut-être le bogue 339888).


Fred (qui top-poste pour faire suivre correctement le message)

PS : n'oublie pas de répondre sur la liste pour que tout le monde puisse
donner son avis. J'ai laissé le fichier en intégralité.

-- Forwarded message from Aurelien <orl_debian@ammd.net> --

On Wed, Nov 23, 2005 at 02:17:17PM +0100, Frédéric Bothamy wrote :
> * Aurelien <orl@> [2005-11-23 11:53] :

Dis-donc, ton client mail ne supprime pas les adresses automatiquement.

> Merci, ça fait plaisir, on n'a pas l'impression d'avoir cherché pour
> rien. Cela dit, cela vient également que tu avais bien décrit le
> problème ainsi que tes recherches et ce que tu avais constaté.
>
> []

Perso, j'ai plus de pommade !! ;-p

>
> Peux-tu poster ton fichier de configuration de gdm ici ? Cela donnera
> peut-être des indications à d'autres personnes

OK, le voici qui suit :

Je vous passe l'introduction, je pars de après "Have Fun Georges !"

#
# Have fun! - George

[daemon]
# Automatic login, if true the first local screen will automatically
# logged
# in as user as set with AutomaticLogin key.
AutomaticLoginEnablelse
AutomaticLogin=wlad

# Timed login, useful for kiosks. Log in a certain user after a certain
# amount of time
TimedLoginEnable=true
TimedLogin=wlad
TimedLoginDelay

# The gdm configuration program that is run from the login screen, you
# should
# probably leave this alone
#Configurator=/usr/bin/gdmsetup --disable-sound --disable-crash-dialog

# The chooser program. Must output the chosen host on stdout, probably
# you
# should leave this alone
#Chooser=/usr/bin/gdmchooser

# The greeter for local (non-xdmcp) logins. Change gdmlogin to
# gdmgreeter to
# get the new graphical greeter.
#Greeter=/usr/bin/gdmlogin
Greeter=/usr/bin/gdmgreeter

# The greeter for xdmcp logins, usually you want a less graphically
# intensive
# greeter here so it's better to leave this with gdmlogin
#RemoteGreeter=/usr/bin/gdmlogin

# Launch the greeter with an additional list of colon seperated gtk
# modules. This is useful for enabling additional feature support
# e.g. gnome accessibility framework. Only "trusted" modules should
# be allowed to minimise security holes
#AddGtkModuleslse
# By default these are the accessibility modules
#GtkModulesList=gail:atk-bridge:/usr/lib/gtk-2.0/modules/libdwellmouselistener:/
usr/lib/gtk-2.0/modules/libkeymouselistener

# Default path to set. The profile scripts will likely override this
DefaultPath=/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games
# Default path for root. The profile scripts will likely override this
RootPath=/usr/local/bin:/usr/local/sbin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/bin/X
11:/usr/games

# If you are having trouble with using a single server for a long time
# and
# want gdm to kill/restart the server, turn this on
#AlwaysRestartServerlse

# User and group used for running gdm GUI applicaitons. By default this
# is set to user gdm and group gdm. This user/group should have very
# limited permissions and access to ony the gdm directories and files.
User=gdm
Group=gdm

# To try to kill all clients started at greeter time or in the Init
# script.
# doesn't always work, only if those clients have a window of their own
#KillInitClients=true
LogDir=/var/log/gdm
# You should probably never change this value unless you have a weird
# setup
PidFile=/var/run/gdm.pid
# Note that a post login script is run before a PreSession script.
# It is run after the login is successful and before any setup is
# run on behalf of the user
PostLoginScriptDir=/etc/gdm/PostLogin/
PreSessionScriptDir=/etc/gdm/PreSession/
PostSessionScriptDir=/etc/gdm/PostSession/
DisplayInitDir=/etc/gdm/Init
# Distributions: If you have some script that runs an X server in say
# VGA mode, allowing a login, could you please send it to me?
#FailsafeXServer=
# if X keeps crashing on us we run this script. The default one does a
# bunch
# of cool stuff to figure out what to tell the user and such and can
# run an X configuration program.
XKeepsCrashing=/etc/gdm/XKeepsCrashing
# Reboot, Halt and suspend commands, you can add different commands
# separated by a semicolon and gdm will use the first one it can find
RebootCommand=/sbin/shutdown -r now "Rebooted from gdm menu."
HaltCommand=/sbin/shutdown -h now "Shut Down from gdm menu."
SuspendCommand=/usr/bin/apm --suspend
# Probably should not touch the below this is the standard setup
ServAuthDir=/var/lib/gdm
# This is our standard startup script. A bit different from a normal
# X session, but it shares a lot of stuff with that. See the provided
# default for more information.
BaseXsession=/etc/gdm/Xsession
# This is a directory where .desktop files describing the sessions live
# It is really a PATH style variable since 2.4.4.2 to allow actual
# interoperability with KDM. Note that <sysconfdir>/dm/Sessions is
# there
# for backwards compatibility reasons with 2.4.4.x
SessionDesktopDir=/etc/X11/sessions/:/etc/dm/Sessions/:/usr/share/gdm/BuiltInSes
sions/:/usr/share/xsessions/
# This is the default .desktop session. One of the ones in
# SessionDesktopDir
DefaultSessionfault.desktop
# Better leave this blank and HOME will be used. You can use syntax ~/
# below
# to indicate home directory of the user. You can also set this to
# something
# like /tmp if you don't want the authorizations to be in home
# directories.
# This is useful if you have NFS mounted home directories. Note that if
# this
# is the home directory the UserAuthFBDir will still be used in case the
# home
# directory is NFS, see security/NeverPlaceCookiesOnNFS to override this
# behavio
ur.
UserAuthDir=
# Fallback if home directory not writable
UserAuthFBDir=/tmp
UserAuthFile=.Xauthority
# The X server to use if we can't figure out what else to run.
StandardXServer=/usr/X11R6/bin/X
# The maximum number of flexible X servers to run.
#FlexibleXServers=5
# And after how many minutes should we reap the flexible server if there
# is
# no activity and no one logged on. Set to 0 to turn off the reaping.
# Does not affect Xnest flexiservers.
#FlexiReapDelayMinutes=5
# the X nest command
Xnest=/usr/X11R6/bin/Xnest -audit 0 -name Xnest
# Automatic VT allocation. Right now only works on Linux. This way
# we force X to use specific vts. turn VTAllocation to false if this
# is causing problems.
FirstVT=7
VTAllocation=true
# Should double login be treated with a warning (and possibility to
# change
# vts on linux and freebsd systems for console logins)
#DoubleLoginWarning=true

# If true then the last login information is printed to the user before
# being prompted for password. While this gives away some info on what
# users are on a system, it on the other hand should give the user an
# idea of when they logged in and if it doesn't seem kosher to them,
# they can just abort the login and contact the sysadmin (avoids running
# malicious startup scripts)
#DisplayLastLoginlse

# Program used to play sounds. Should not require any 'daemon' or
# anything
# like that as it will be run when no one is logged in yet.
#SoundProgram=/usr/bin/play

# These are the languages that the console cannot handle because of font
# issues. Here we mean the text console, not X. This is only used
# when there are errors to report and we cannot start X.
# This is the default:
#ConsoleCannotHandle=am,ar,az,bn,el,fa,gu,hi,ja,ko,ml,mr,pa,ta,zh

[security]
AllowRootlse
AllowRemoteRootlse
# This will allow remote timed login
AllowRemoteAutoLogin=true
# 0 is the most restrictive, 1 allows group write permissions, 2 allows
# all
# write permissions
RelaxPermissions=0
# Check if directories are owned by logon user. Set to false, if you
# have, for
# example, home directories owned by some other user.
CheckDirOwner=true
# Number of seconds to wait after a bad login
#RetryDelay=1
# Maximum size of a file we wish to read. This makes it hard for a user
# to DoS
# us by using a large file.
#UserMaxFilee536
# If true this will basically append -nolisten tcp to every X command
# line,
# a good default to have (why is this a "negative" setting? because if
# it is false, you could still not allow it by setting command line of
# any particular server). It's probably better to ship with this on
# since most users will not need this and it's more of a security risk
# then anything else.
# Note: Anytime we find a -query or -indirect on the command line we do
# not add a "-nolisten tcp", as then the query just wouldn't work, so
# this setting only affects truly local sessions.
DisallowTCPlse
# By default never place cookies if we "detect" NFS. We detect NFS
# by detecting "root-squashing". It seems bad practice to place
# cookies on things that go over the network by default and thus we
# don't do it by default. Sometimes you can however use safe remote
# filesystems where this is OK and you may want to have the cookie in
# your
# home directory.
#NeverPlaceCookiesOnNFS=true

# XDMCP is the protocol that allows remote login. If you want to log
# into
# gdm remotely (I'd never turn this on on open network, use ssh for such
# remote usage that). You can then run X with -query <thishost> to log
# in,
# or -indirect <thishost> to run a chooser. Look for the 'Terminal'
# server
# type at the bottom of this config file.
[xdmcp]
# Distributions: Ship with this off. It is never a safe thing to leave
# out on the net. Setting up /etc/hosts.allow and /etc/hosts.deny to
# only
# allow local access is another alternative but not the safest.
# Firewalling port 177 is the safest if you wish to have xdmcp on.
# Read the manual for more notes on the security of XDMCP.
Enablelse
# Honour indirect queries, we run a chooser for these, and then redirect
# the user to the chosen host. Otherwise we just log the user in
# locally.
#HonorIndirect=true
# Maximum pending requests
#MaxPending=4
#MaxPendingIndirect=4
# Maximum open XDMCP sessions at any point in time
#MaxSessions
# Maximum wait times
#MaxWait
#MaxWaitIndirect
# How many times can a person log in from a single host. Usually better
# to
# keep low to fend off DoS attacks by running many logins from a single
# host. This is now set at 2 since if the server crashes then gdm
# doesn't
# know for some time and wouldn't allow another session.
#DisplaysPerHost=2
# The number of seconds after which a non-responsive session is logged
# off.
# Better keep this low.
#PingIntervalSeconds
# The port. 177 is the standard port so better keep it that way
#Port7
# Willing script, none is shipped and by default we'll send
# hostname system id. But if you supply something here, the
# output of this script will be sent as status of this host so that
# the chooser can display it. You could for example send load,
# or mail details for some user, or some such.
#Willing=/etc/gdm/Xwilling

[gui]
# The specific gtkrc file we use. It should be the full path to the
# gtkrc
# that we need. Unless you need a specific gtkrc that doesn't
# correspond to
# a specific theme, then just use the GtkTheme key
#GtkRC=/usr/share/themes/Default/gtk/gtkrc

# The GTK+ theme to use for the gui
#GtkThemefault
# If to allow changing the GTK+ (widget) theme from the greeter.
# Currently
# this only affects the standard greeter as the graphical greeter does
# not yet have this ability
#AllowGtkThemeChange=true
# Comma separated list of themes to allow. These must be the names of
# the
# themes installed in the standard locations for gtk themes. You can
# also specify 'all' to allow all installed themes. These should be
# just
# the basenames of the themes such as 'Thinice' or 'LowContrast'.
#GtkThemesToAllow=all

# Maximum size of an icon, larger icons are scaled down
#MaxIconWidth8
#MaxIconHeight8

[greeter]
# Greeter has a nice title bar that the user can move
#TitleBar=true
# Configuration is available from the system menu of the greeter
#ConfigAvailable=true
# Face browser is enabled. This only works currently for the
# standard greeter as it is not yet enabled in the graphical greeter.
Browserlse
# The default picture in the browser
#DefaultFace=/usr/share/pixmaps/nobody.png
# These are things excluded from the face browser, not from logging in
Exclude=bin,daemon,adm,lp,sync,shutdown,halt,mail,news,uucp,operator,nobody,gdm,
postgres,pvm,rpm
# As an alternative to the above this is the minimum uid to show
MinimalUID00
# If user or user.png exists in this dir it will be used as his picture
#GlobalFaceDir=/usr/share/faces/
# File which contains the locale we show to the user. Likely you want
# to use
# the one shipped with gdm and edit it. It is not a standard
# locale.alias file,
# although gdm will be able to read a standard locale.alias file as
# well.
LocaleFile=/etc/gdm/locale.conf
# Logo shown in the standard greeter
Logo=/usr/share/pixmaps/gdmDebianLogo.xpm
# The standard greeter should shake if a user entered the wrong username
# or
# password. Kind of cool looking
#Quiver=true
# The Actions menu (formerly system menu) is shown in the greeter, this
# is the
# menu that contains reboot, shutdown, suspend, config and chooser.
# None of
# these is available if this is off. They can be turned off
# individually
# however
SystemMenu=true
# The Actions in the Actions menu require the root password
SecureSystemMenu=true
# Should the chooser button be shown. If this is shown, GDM can drop
# into
# chooser mode which will run the xdmcp chooser locally and allow the
# user
# to connect to some remote host. Local XDMCP does not need to be
# enabled
# however
#ChooserButton=true
# Note to distributors, if you wish to have a different Welcome string
# and wish to have this translated you can have entries such as
# Welcome[cs]=Vitejte na %n
# Just make sure the string is in utf-8
# Welcome is for all console logins and RemoteWelcome is for remote
# logins
# (through XDMCP).
# The default entries that are shipped are translated inside gdm and
# are as follows:
#Welcome=Welcome
#RemoteWelcome=Welcome to %n
# Don't allow user to move the standard greeter window. Only makes
# sense
# if TitleBar is on
#LockPositionlse
# Set a position rather then just centering the window. If you enter
# negative values for the position it is taken as an offset from the
# right or bottom edge.
#SetPositionlse
#PositionX=0
#PositionY=0
# Xinerama screen we use to display the greeter on. Not for true
# multihead, currently only works for Xinerama.
#XineramaScreen=0
# Background settings for the standard greeter:
# Type can be 0=None, 1=Image, 2=Color
#BackgroundType=2
BackgroundType=2
#BackgroundImage=
#BackgroundScaleToFit=true
#BackgroundColor=#76848F
# XDMCP session should only get a color, this is the sanest setting
# since
# you don't want to take up too much bandwidth
#BackgroundRemoteOnlyColor=true
# Program to run to draw the background in the standard greeter.
# Perhaps
# something like an xscreensaver hack or some such.
#BackgroundProgram=
# if this is true then the background program is run always, otherwise
# it is only run when the BackgroundType is 0 (None)
#RunBackgroundProgramAlwayslse
# Show the Failsafe sessions. These are much MUCH nicer (focus for
# xterm for
# example) and more failsafe then those supplied by scripts so distros
# should
# use this rather then just running an xterm from a script.
#ShowGnomeFailsafeSession=true
#ShowXtermFailsafeSession=true
# Normally there is a session type called 'Last' that is shown which
# refers to
# the last session the user used. If off, we will be in 'switchdesk'
# mode where
# the session saving stuff is disabled in GDM
#ShowLastSession=true
# Always use 24 hour clock no matter what the locale.
#Use24Clocklse
Use24Clock=true
# Use circles in the password field. Looks kind of cool actually,
# but only works with certain fonts.
#UseCirclesInEntrylse
# Do not show any visible feedback in the password field. This is
# standard
# for instance in console, xdm and ssh.
#UseInvisibleInEntrylse
# These two keys are for the new greeter. Circles is the standard
# shipped theme
#GraphicalTheme=circles
GraphicalTheme=happygnome
GraphicalThemeDir=/usr/share/gdm/themes/
# If InfoMsgFile points to a file, the greeter will display the contents
# of the
# file in a modal dialog box before the user is allowed to log in.
#InfoMsgFile=
# If InfoMsgFile is present then InfoMsgFont can be used to specify the
# font
# to be used when displaying the contents of the file.
#InfoMsgFont=Sans 24
# If SoundOnLogin is true, then the greeter will beep when login is
# ready
# for user input. If SoundOnLogin is a file and the greeter finds the
# 'play' executable (see daemon/SoundProgram) it will play that file
# instead of just beeping
#SoundOnLogin=true
#SoundOnLoginFile=
GraphicalThemeRandlse

# The chooser is what's displayed when a user wants an indirect XDMCP
# session, or selects Run XDMCP chooser from the system menu
[chooser]
# Default image for hosts
#DefaultHostImg=/usr/share/pixmaps/nohost.png
# Directory with host images, they are named by the hosts: host or
# host.png
HostImageDir=/usr/share/hosts/
# Time we scan for hosts (well only the time we tell the user we are
# scanning actually, we continue to listen even after this has
# expired)
#ScanTime=4
# A comma separated lists of hosts to automatically add (if they answer
# to
# a query of course). You can use this to reach hosts that broadcast
# cannot
# reach.
Hosts=
# Broadcast a query to get all hosts on the current network that answer
Broadcast=true
# Set it to true if you want to send a multicast query to hosts.
Multicastlse
# It is an IPv6 multicast address.It is hardcoded here and will be
# replaced when
# officially registered xdmcp multicast address of TBD will be available
#Multicast_Addr02::1
# Allow adding random hosts to the list by typing in their names
#AllowAdd=true

[debug]
# This will enable debugging into the syslog, usually not neccessary
# and it creates a LOT of spew of random stuff to the syslog. However
# it
# can be useful in determining when something is going very wrong.
Enablelse

[servers]
# These are the standard servers. You can add as many you want here
# and they will always be started. Each line must start with a unique
# number and that will be the display number of that server. Usually
# just
# the 0 server is used.
0=Standard
#1=Standard
# Note the VTAllocation and FirstVT keys on linux and freebsd.
# Don't add any vt<number> arguments if VTAllocation is on, and set
# FirstVT to
# be the first vt available that your gettys don't grab (gettys are
# usually
# dumb and grab even a vt that has already been taken). Using 7 will
# work
# pretty much for all linux distributions. VTAllocation is not
# currently
# implemented on anything but linux and freebsd. Feel free to send
# patches.
# X servers will just not get any extra arguments then.
#
# If you want to run an X terminal you could add an X server such as
# this
#0=Terminal -query serverhostname
# or for a chooser (optionally serverhostname could be localhost)
#0=Terminal -indirect serverhostname
#
# If you wish to run the XDMCP chooser on the local display use the
# following
# line
#0=Chooser

## Note:
# is your X server not listening to TCP requests? Perhaps you should
# look
# at the security/DisallowTCP setting!

# Definition of the standard X server.
[server-Standard]
name=Standard server
command=/usr/X11R6/bin/X -audit 0
flexible=true

# To use this server type you should add -query host or -indirect host
# to the command line
[server-Terminal]
name=Terminal server
# Add -terminate to make things behave more nicely
command=/usr/X11R6/bin/X -audit 0 -terminate
# Make this not appear in the flexible servers (we need extra params
# anyway, and terminate would be bad for xdmcp choosing). You can
# make a terminal server flexible, but not with an indirect query.
# If you need flexible indirect query server, then you must get rid
# of the -terminate and the only way to kill the flexible server will
# then be by Ctrl-Alt-Backspace
flexiblelse
# Not local, we do not handle the logins for this X server
handledlse

# To use this server type you should add -query host or -indirect host
# to the command line
[server-Chooser]
name=Chooser server
command=/usr/X11R6/bin/X -audit 0
# Make this not appear in the flexible servers for now, but if you
# wish to allow a chooser server then make this true. This is the
# only way to make a flexible chooser server that behaves nicely.
flexiblelse
# Run the chooser instead of the greeter. When the user chooses a
# machine they will get this same server but run with
# "-terminate -query hostname"
chooser=true



Pfff.. C'est long Bah merci d'avance à ceux qui auront le courage
de lire jusqu'au bout !!! :-p

--


ORL (alias Yvette H.)

Responsable internet de l'AMMD

__________________________________
/ Chiffrez et signez vos messages
| Utilisez les clés GnuPG |
| |
| HOWTO : |
| http://vilya.org/gpg/gpg-intro.html |
__________________________________ /
=



-- End forwarded message --

--
Comment poser les questions de manière intelligente ?
http://www.gnurou.org/Writing/SmartQuestionsFr
Comment signaler efficacement un bug ?
http://www.chiark.greenend.org.uk/~sgtatham/bugs-fr.html


--
Pensez à lire la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench

Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:"

To UNSUBSCRIBE, email to debian-user-french-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
  • Partager ce contenu :
Vos réponses
Trier par : date / pertinence
Aurelien
Le #8583071
On Thu, Nov 24, 2005 at 12:55:39AM +0100, Frédéric Bothamy wrote :
Bonjour,

Je crois que le mieux est de faire comme Davy l'a indiqué : rechercher
s'il n'y aurait pas un fichier gdm.conf.dpgk-new et fusionner les
valeurs de celui-ci avec ton fichier. Il est possible que le problème
vienne de "Greeter=/usr/bin/gdmgreeter" (c'est peut-être le bogue 339888).



OK, effectivement les lignes diffèrent concernant cela :


42,43c42
< #Greeter=/usr/bin/gdmlogin
< Greeter=/usr/bin/gdmgreeter
---
Greeter=/usr/lib/gdm/gdmgreeter






Fred (qui top-poste pour faire suivre correctement le message)

PS : n'oublie pas de répondre sur la liste pour que tout le monde puisse
donner son avis. J'ai laissé le fichier en intégralité.



OK, désolé, je viens d'inscrire vraiment mon mail à la liste (jusqu'ici
je la consultais de loin), et je pensais que mutt faisait un reply-to
automatique dessus comme avec de nombreuses listes yahoogroupes !
Bon bah désolé pour ceux qui n'ont pas eu toute la correspondance !


--
============================= ORL (alias Yvette H.)
------------------------

__________________________________
/ Chiffrez et signez vos messages
| Utilisez les clés GnuPG |
| |
| HOWTO : |
| http://vilya.org/gpg/gpg-intro.html |
__________________________________ /
=================================

--
Pensez à lire la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench

Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:"

To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact
Poster une réponse
Anonyme