Twitter iPhone pliant OnePlus 11 PS5 Disney+ Orange Livebox Windows 11

Re: disque firewire/NetBSD

1 réponse
Avatar
mp2002
Bonjour,

je reposte car mon message et la réponse d'Emmanuel Dreyfus ont
mystérieusement disparu. Ils sont dans Google donc j'ai quand même pu taper
les References à la main, j'espère qu'elles vont bien passer.

J'ai essayé "scsictl /dev/scsibus0 scan all all", il mouline une quinzaine
de secondes et n'affiche rien. Idem avec "scan 0 0".

Je ne suis pas en -current mais en 2.0 BETA car en -current l'ordi marque
1/2 se de pause toutes les 15 secondes. J'ai identifié que cela se
produisait à chaque "pic" d'activité de [ioflush] mais je n'en sais pas
plus.

Voici les parties intéressantes du dmesg:


NetBSD 2.0_BETA (MKERNEL) #5: Sat Jul 24 19:40:47 CEST 2004
matthieu@pollux.my.domain:/usr/src/sys/arch/i386/compile/MKERNEL
total memory = 766 MB
avail memory = 744 MB
BIOS32 rev. 0 found at 0xfd7b0
PCI BIOS rev. 2.1 found at 0xfd936
pcibios: config mechanism [1][x], special cycles [x][x], last bus 5
PCI IRQ Routing Table rev. 1.0 found at 0xfded0, size 224 bytes (12
entries)
PCI Interrupt Router at 000:31:0 (Intel 82371FB PCI-to-ISA Bridge (PIIX)
compatible)
------------------------------------------
device vendor product pin PIRQ IRQ stage
------------------------------------------
000:29:0 0x8086 0x24c2 A 0x00 11 0 already assigned
000:29:1 0x8086 0x24c4 B 0x03 11 0 already assigned
000:29:2 0x8086 0x24c7 C 0x02 11 0 already assigned
000:29:7 0x8086 0x24cd D 0x07 11 0 already assigned
000:31:1 0x8086 0x24ca A 0x02 11 0 fixed up
000:31:3 0x8086 0x24c3 B 0x01 11 0 already assigned
000:31:5 0x8086 0x24c5 B 0x01 11 0 already assigned
000:31:6 0x8086 0x24c6 B 0x01 11 0 already assigned
001:00:0 0x1002 0x4c57 A 0x00 11 0 already assigned
002:00:0 0x104c 0xac56 A 0x03 11 0 already assigned
002:07:0 0x104c 0x8026 A 0x00 11 0 already assigned
002:08:0 0x8086 0x103d A 0x04 11 0 already assigned
------------------------------------------
PCI fixup examining 8086:1a30
PCI fixup examining 8086:1a31
PCI fixup examining 1002:4c57
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI fixup examining 8086:24c2
PCI fixup examining 8086:24c4
PCI fixup examining 8086:24c7
PCI fixup examining 8086:24cd
PCI fixup examining 8086:2448
PCI fixup examining 104c:ac56
PCI bridge 2: primary 2, secondary 3, subordinate 3
PCI fixup examining 104c:8026
PCI fixup examining 8086:103d
PCI bridge 1: primary 0, secondary 2, subordinate 3
PCI fixup examining 8086:24cc
PCI fixup examining 8086:24ca
PCI fixup examining 8086:24c3
PCI fixup examining 8086:24c5
PCI fixup examining 8086:24c6
PCI bus #3 is the last bus
[System BIOS Setting]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x1a30
10h mem 0xe0000000 0x04000000
[OK]
000:01:0 0x8086 0x1a31
[OK]
000:29:0 0x8086 0x24c2
20h port 0x00001800 0x00000020
[OK]
000:29:1 0x8086 0x24c4
20h port 0x00001820 0x00000020
[OK]
000:29:2 0x8086 0x24c7
20h port 0x00001840 0x00000020
[OK]
000:29:7 0x8086 0x24cd
10h mem 0xd0000000 0x00000400
[OK]
000:30:0 0x8086 0x2448
[OK]
000:31:0 0x8086 0x24cc
[OK]
000:31:1 0x8086 0x24ca
10h port 0x00000000 0x00000008
14h port 0x00000000 0x00000004
18h port 0x00000000 0x00000008
1ch port 0x00000000 0x00000004
20h port 0x00001860 0x00000010
24h mem 0x00000000 0x00000400
[NG]
000:31:3 0x8086 0x24c3
20h port 0x00001880 0x00000020
[OK]
000:31:5 0x8086 0x24c5
10h port 0x00001c00 0x00000100
14h port 0x000018c0 0x00000040
18h mem 0xd0000c00 0x00000200
1ch mem 0xd0000800 0x00000100
[OK]
000:31:6 0x8086 0x24c6
10h port 0x00002400 0x00000100
14h port 0x00002000 0x00000080
[OK]
001:00:0 0x1002 0x4c57
10h mem 0xe8000000 0x08000000
14h port 0x00003000 0x00000100
18h mem 0xd0100000 0x00010000
[OK]
002:00:0 0x104c 0xac56
10h mem 0x50000000 0x00001000
[OK]
002:07:0 0x104c 0x8026
10h mem 0xd0205000 0x00000800
14h mem 0xd0200000 0x00004000
[OK]
002:08:0 0x8086 0x103d
10h mem 0xd0204000 0x00001000
14h port 0x00008000 0x00000040
[OK]
--------------------------[ 1 devices bogus]
Physical memory end: 0x2ff5c000
PCI memory mapped I/O space start: 0x30000000
[PCIBIOS fixup stage]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x1a30
10h mem 0xe0000000 0x04000000
[OK]
000:01:0 0x8086 0x1a31
[OK]
000:29:0 0x8086 0x24c2
20h port 0x00001800 0x00000020
[OK]
000:29:1 0x8086 0x24c4
20h port 0x00001820 0x00000020
[OK]
000:29:2 0x8086 0x24c7
20h port 0x00001840 0x00000020
[OK]
000:29:7 0x8086 0x24cd
10h mem 0xd0000000 0x00000400
[OK]
000:30:0 0x8086 0x2448
[OK]
000:31:0 0x8086 0x24cc
[OK]
000:31:1 0x8086 0x24ca
10h port 0x00005800 0x00000008
14h port 0x00005808 0x00000004
18h port 0x00005810 0x00000008
1ch port 0x0000580c 0x00000004
20h port 0x00001860 0x00000010
24h mem 0x30000000 0x00000400
[OK]
000:31:3 0x8086 0x24c3
20h port 0x00001880 0x00000020
[OK]
000:31:5 0x8086 0x24c5
10h port 0x00001c00 0x00000100
14h port 0x000018c0 0x00000040
18h mem 0xd0000c00 0x00000200
1ch mem 0xd0000800 0x00000100
[OK]
000:31:6 0x8086 0x24c6
10h port 0x00002400 0x00000100
14h port 0x00002000 0x00000080
[OK]
001:00:0 0x1002 0x4c57
10h mem 0xe8000000 0x08000000
14h port 0x00003000 0x00000100
18h mem 0xd0100000 0x00010000
[OK]
002:00:0 0x104c 0xac56
10h mem 0x50000000 0x00001000
[OK]
002:07:0 0x104c 0x8026
10h mem 0xd0205000 0x00000800
14h mem 0xd0200000 0x00004000
[OK]
002:08:0 0x8086 0x103d
10h mem 0xd0204000 0x00001000
14h port 0x00008000 0x00000040
[OK]
--------------------------[ 0 devices bogus]
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Mobile Pentium 4 (686-class), 1993.68 MHz, id 0xf27
cpu0: features bfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features bfebf9ff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebf9ff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu0: L2 cache 512 KB 64B/line 8-way
cpu0: ITLB 4K/4M: 128 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: 16 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok

(...)

ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-to-PCI Bridge (rev.
0x83)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
cbb0 at pci2 dev 0 function 0: Texas Instruments PCI1510 PCI-CardBus Bridge
(rev. 0x00)
fwohci0 at pci2 dev 7 function 0: Texas Instruments TSB43AA21 OHCI IEEE
1394 Host Controller (rev. 0x00)
fwohci0: interrupting at irq 11
fwohci0: OHCI 1.1, 00:06:1b:00:60:04:4a:a4, 400Mb/s, 2048 max_rec, 4
ir_ctx, 8 it_ctx
fxp0 at pci2 dev 8 function 0: Intel PRO/100 VE (MOB) Network Controller,
rev 131
fxp0: interrupting at irq 11
fxp0: Ethernet address 00:06:1b:ae:97:4c
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0
pcmcia0 at cardslot0

(...)

auich0: measured ac97 link rate at 48002 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
Kernelized RAIDframe activated
fw0 at fwohci0: 00:06:1b:00:60:04:4a:a4:0a:02:ff:ff:f0:01:00:00
uhidev0 at uhub1 port 2 configuration 1 interface 0

(...)

fwnode0 at fwohci0 Node 1: UID 00:00:00:00:00:00:00:00
fwnode1 at fwohci0 Node 1: UID 00:30:e0:f4:00:10:29:b0
fwnode0 detached
fwnode1: Link Speed: 100Mb/s, max_rec: 64 bytes
sbpscsi0 at fwnode1
scsibus0 at sbpscsi0: 1 target, 1 lun per target

fin du dmesg

Matthieu

1 réponse

Avatar
manu
mp2002 wrote:

je reposte car mon message et la réponse d'Emmanuel Dreyfus ont
mystérieusement disparu. Ils sont dans Google donc j'ai quand même pu taper
les References à la main, j'espère qu'elles vont bien passer.


C'est bon.

J'ai essayé "scsictl /dev/scsibus0 scan all all", il mouline une quinzaine
de secondes et n'affiche rien. Idem avec "scan 0 0".


Si il doit afficher des choses, c'est sur la console, donc faire un
dmesg après devrait les montrer.

Je ne suis pas en -current mais en 2.0 BETA car en -current l'ordi marque
1/2 se de pause toutes les 15 secondes. J'ai identifié que cela se
produisait à chaque "pic" d'activité de [ioflush] mais je n'en sais pas
plus.


Houla, c'est pas normal, ca. Tu peux ouvrir un rapport de bug, histoire
que quelqu'un de competent sur cette question puisse eventuellement se
pencher dessus?

Ca se passe là:
http://www.NetBSD.org/cgi-bin/sendpr.cgi?gndb=netbsd

Attention, ca finit dans une archive web, donc dissimule ton adresse si
tu ne veux pas qu'elle soit choppée par les spambots.

--
Emmanuel Dreyfus
Un bouquin en français sur BSD:
http://www.eyrolles.com/Informatique/Livre/9782212114638/livre-bsd.php