Bonjour,
Je teste actuellement Virtual Server Migration Toolkit afin de migrer des
serveurs NT4
Dans la doc, il est indiqué qu'il faut installer le hotfix 872952..mais
impossible de le trouver. Quelqu'un a-t-il déjà eu connaissance de ce hotfix
ou est-ce une erreur dans la doc ?
Merci.
Eric.
Cette action est irreversible, confirmez la suppression du commentaire ?
Signaler le commentaire
Veuillez sélectionner un problème
Nudité
Violence
Harcèlement
Fraude
Vente illégale
Discours haineux
Terrorisme
Autre
Fabricem [MS]
Bonjour
Comme l'indique l'article de la base de connaissance http://support.microsoft.com/default.aspx?scid=kb;en-us;872952, ce fix n'est pas public pour l'obtenir il faut s'adresser aupres du support Microsoft soit au travers de votre contrat de support soit en contactant Microsoft au 0 825 827 829
Cdlt
-- Fabrice Meillon Architecte Infrastructure Division Développeurs et Plate-Forme d'Entreprise Microsoft France
"Eric B." a écrit dans le message de news:
Bonjour, Je teste actuellement Virtual Server Migration Toolkit afin de migrer des serveurs NT4 Dans la doc, il est indiqué qu'il faut installer le hotfix 872952..mais impossible de le trouver. Quelqu'un a-t-il déjà eu connaissance de ce hotfix ou est-ce une erreur dans la doc ? Merci. Eric.
Bonjour
Comme l'indique l'article de la base de connaissance
http://support.microsoft.com/default.aspx?scid=kb;en-us;872952, ce fix n'est
pas public pour l'obtenir il faut s'adresser aupres du support Microsoft
soit au travers de votre contrat de support soit en contactant Microsoft au
0 825 827 829
Cdlt
--
Fabrice Meillon
Architecte Infrastructure
Division Développeurs et Plate-Forme d'Entreprise
Microsoft France
"Eric B." <EricB@discussions.microsoft.com> a écrit dans le message de news:
5DFA7ADE-E395-4983-B29C-D3819291347F@microsoft.com...
Bonjour,
Je teste actuellement Virtual Server Migration Toolkit afin de migrer des
serveurs NT4
Dans la doc, il est indiqué qu'il faut installer le hotfix 872952..mais
impossible de le trouver. Quelqu'un a-t-il déjà eu connaissance de ce
hotfix
ou est-ce une erreur dans la doc ?
Merci.
Eric.
Comme l'indique l'article de la base de connaissance http://support.microsoft.com/default.aspx?scid=kb;en-us;872952, ce fix n'est pas public pour l'obtenir il faut s'adresser aupres du support Microsoft soit au travers de votre contrat de support soit en contactant Microsoft au 0 825 827 829
Cdlt
-- Fabrice Meillon Architecte Infrastructure Division Développeurs et Plate-Forme d'Entreprise Microsoft France
"Eric B." a écrit dans le message de news:
Bonjour, Je teste actuellement Virtual Server Migration Toolkit afin de migrer des serveurs NT4 Dans la doc, il est indiqué qu'il faut installer le hotfix 872952..mais impossible de le trouver. Quelqu'un a-t-il déjà eu connaissance de ce hotfix ou est-ce une erreur dans la doc ? Merci. Eric.
Pour info, il existe un forum microsoft.public.fr.virtualpc
et si tu causes anglais microsoft.public.virtualserver
-- François Dunoyer [MVP Windows Server - Windows NT Server] Des infos en Vrac : http://fdunoyer.free.fr/ta/envrac.htm Site perso : http://www.fdunoyer.net
Pour info, il existe un forum
microsoft.public.fr.virtualpc
et si tu causes anglais
microsoft.public.virtualserver
--
François Dunoyer [MVP Windows Server - Windows NT Server]
Des infos en Vrac : http://fdunoyer.free.fr/ta/envrac.htm
Site perso : http://www.fdunoyer.net
Pour info, il existe un forum microsoft.public.fr.virtualpc
et si tu causes anglais microsoft.public.virtualserver
-- François Dunoyer [MVP Windows Server - Windows NT Server] Des infos en Vrac : http://fdunoyer.free.fr/ta/envrac.htm Site perso : http://www.fdunoyer.net
Fabricem [MS]
Bonjour
Ce n'est pas une erreur, il s'agit d'un correctif à appliquer suite à la migration de la partition
You cannot run the Chkdsk.exe program on NTFS file system volumes on a Windows NT 4.0 Service Pack 4-based computer http://support.microsoft.com/kb/872952/fr
Aide VSMT
Using VSMT to migrate a source server running Windows NT® Server 4.0 upgrades any NFTS volumes to a new version level. This is due to standard file system mechanisms that are embedded in the ADS Deployment Agent. This occurs even though the NTFS volume is mounted as read-only, and it cannot be prevented.
The upgrade does not change the basic file system structure, so the system can still start and access the NTFS volumes normally. However, certain Windows NT 4.0 file system utilities, such as Chkdsk and Defrag, will no longer function, and you should not attempt to run them. Microsoft is currently developing a hotfix that will restore the ability to run Chkdsk following a migration.
Ce hotfix n'est pas public, il faut contacter le support 0 825 827 829
Cdlt -- Fabrice Meillon Architecte Infrastructure Division Développeurs et Plate-Forme d'Entreprise Microsoft France
"F. Dunoyer [MVP]" ~.net> a écrit dans le message de news:
Pour info, il existe un forum microsoft.public.fr.virtualpc
et si tu causes anglais microsoft.public.virtualserver
-- François Dunoyer [MVP Windows Server - Windows NT Server] Des infos en Vrac : http://fdunoyer.free.fr/ta/envrac.htm Site perso : http://www.fdunoyer.net
Bonjour
Ce n'est pas une erreur, il s'agit d'un correctif à appliquer suite à la
migration de la partition
You cannot run the Chkdsk.exe program on NTFS file system volumes on a
Windows NT 4.0 Service Pack 4-based computer
http://support.microsoft.com/kb/872952/fr
Aide VSMT
Using VSMT to migrate a source server running Windows NT® Server 4.0
upgrades any NFTS volumes to a new version level. This is due to standard
file system mechanisms that are embedded in the ADS Deployment Agent. This
occurs even though the NTFS volume is mounted as read-only, and it cannot be
prevented.
The upgrade does not change the basic file system structure, so the system
can still start and access the NTFS volumes normally. However, certain
Windows NT 4.0 file system utilities, such as Chkdsk and Defrag, will no
longer function, and you should not attempt to run them. Microsoft is
currently developing a hotfix that will restore the ability to run Chkdsk
following a migration.
Ce hotfix n'est pas public, il faut contacter le support 0 825 827 829
Cdlt
--
Fabrice Meillon
Architecte Infrastructure
Division Développeurs et Plate-Forme d'Entreprise
Microsoft France
"F. Dunoyer [MVP]" <wdunoyer-nimportequoi@laposte~.net> a écrit dans le
message de news: mn.503f7d4c502de37b.14554@laposte.net...
Pour info, il existe un forum
microsoft.public.fr.virtualpc
et si tu causes anglais
microsoft.public.virtualserver
--
François Dunoyer [MVP Windows Server - Windows NT Server]
Des infos en Vrac : http://fdunoyer.free.fr/ta/envrac.htm
Site perso : http://www.fdunoyer.net
Ce n'est pas une erreur, il s'agit d'un correctif à appliquer suite à la migration de la partition
You cannot run the Chkdsk.exe program on NTFS file system volumes on a Windows NT 4.0 Service Pack 4-based computer http://support.microsoft.com/kb/872952/fr
Aide VSMT
Using VSMT to migrate a source server running Windows NT® Server 4.0 upgrades any NFTS volumes to a new version level. This is due to standard file system mechanisms that are embedded in the ADS Deployment Agent. This occurs even though the NTFS volume is mounted as read-only, and it cannot be prevented.
The upgrade does not change the basic file system structure, so the system can still start and access the NTFS volumes normally. However, certain Windows NT 4.0 file system utilities, such as Chkdsk and Defrag, will no longer function, and you should not attempt to run them. Microsoft is currently developing a hotfix that will restore the ability to run Chkdsk following a migration.
Ce hotfix n'est pas public, il faut contacter le support 0 825 827 829
Cdlt -- Fabrice Meillon Architecte Infrastructure Division Développeurs et Plate-Forme d'Entreprise Microsoft France
"F. Dunoyer [MVP]" ~.net> a écrit dans le message de news:
Pour info, il existe un forum microsoft.public.fr.virtualpc
et si tu causes anglais microsoft.public.virtualserver
-- François Dunoyer [MVP Windows Server - Windows NT Server] Des infos en Vrac : http://fdunoyer.free.fr/ta/envrac.htm Site perso : http://www.fdunoyer.net
Eric B.
Bonjour,
Merci à tous pour vos réponses !
Cordialement, Eric.
"Fabricem [MS]" a écrit :
Bonjour
Ce n'est pas une erreur, il s'agit d'un correctif à appliquer suite à la migration de la partition
You cannot run the Chkdsk.exe program on NTFS file system volumes on a Windows NT 4.0 Service Pack 4-based computer http://support.microsoft.com/kb/872952/fr
Aide VSMT
Using VSMT to migrate a source server running Windows NT® Server 4.0 upgrades any NFTS volumes to a new version level. This is due to standard file system mechanisms that are embedded in the ADS Deployment Agent. This occurs even though the NTFS volume is mounted as read-only, and it cannot be prevented.
The upgrade does not change the basic file system structure, so the system can still start and access the NTFS volumes normally. However, certain Windows NT 4.0 file system utilities, such as Chkdsk and Defrag, will no longer function, and you should not attempt to run them. Microsoft is currently developing a hotfix that will restore the ability to run Chkdsk following a migration.
Ce hotfix n'est pas public, il faut contacter le support 0 825 827 829
Cdlt -- Fabrice Meillon Architecte Infrastructure Division Développeurs et Plate-Forme d'Entreprise Microsoft France
Ce n'est pas une erreur, il s'agit d'un correctif à appliquer suite à la
migration de la partition
You cannot run the Chkdsk.exe program on NTFS file system volumes on a
Windows NT 4.0 Service Pack 4-based computer
http://support.microsoft.com/kb/872952/fr
Aide VSMT
Using VSMT to migrate a source server running Windows NT® Server 4.0
upgrades any NFTS volumes to a new version level. This is due to standard
file system mechanisms that are embedded in the ADS Deployment Agent. This
occurs even though the NTFS volume is mounted as read-only, and it cannot be
prevented.
The upgrade does not change the basic file system structure, so the system
can still start and access the NTFS volumes normally. However, certain
Windows NT 4.0 file system utilities, such as Chkdsk and Defrag, will no
longer function, and you should not attempt to run them. Microsoft is
currently developing a hotfix that will restore the ability to run Chkdsk
following a migration.
Ce hotfix n'est pas public, il faut contacter le support 0 825 827 829
Cdlt
--
Fabrice Meillon
Architecte Infrastructure
Division Développeurs et Plate-Forme d'Entreprise
Microsoft France
Ce n'est pas une erreur, il s'agit d'un correctif à appliquer suite à la migration de la partition
You cannot run the Chkdsk.exe program on NTFS file system volumes on a Windows NT 4.0 Service Pack 4-based computer http://support.microsoft.com/kb/872952/fr
Aide VSMT
Using VSMT to migrate a source server running Windows NT® Server 4.0 upgrades any NFTS volumes to a new version level. This is due to standard file system mechanisms that are embedded in the ADS Deployment Agent. This occurs even though the NTFS volume is mounted as read-only, and it cannot be prevented.
The upgrade does not change the basic file system structure, so the system can still start and access the NTFS volumes normally. However, certain Windows NT 4.0 file system utilities, such as Chkdsk and Defrag, will no longer function, and you should not attempt to run them. Microsoft is currently developing a hotfix that will restore the ability to run Chkdsk following a migration.
Ce hotfix n'est pas public, il faut contacter le support 0 825 827 829
Cdlt -- Fabrice Meillon Architecte Infrastructure Division Développeurs et Plate-Forme d'Entreprise Microsoft France